Products

LSS-100X ultrasonic flowmeter (external and plug-in)

LSS-100X ultrasonic flowmeter (external and plug-in type) can be widely used for online measurement and system monitoring of almost all liquids in pipeline, petrochemical, metallurgy, electric power, water conservancy, water supply companies, energy monitoring, etc., to realize the measurement and detection of flow rate, flow rate and cumulative amount of various fluids, as well as the functions of flow switch and fluid identification.

Classification:

Ultrasonic Flowmeter

Keyword:

sensor

measurement

Message

Product details

Product Introduction

Technical Parameter

Measuring principle	Principle of ultrasonic time difference method
Flow rate range	0~土10m/s
Measuring caliber range (plug-in)	DN80-6000
Measuring caliber range (external mounting type)	Dn15-6000 (small: dn15-100; medium: dn50-700; large: dn300-6000)
Accuracy	Better than ± 1.0%
Host protection grade	IP65
Sensor protection grade	IP68 (glue filling)
Power Supply	DC8-36V Or AC85-264V
Operating temperature of main engine	- 20-60°C
Output mode	With 485 communication interface, 4-20mA current signal and pulse signal output.
Plug in sensor	The sensor screw rod has no tight thread, can be inserted vertically and the emission angle is not affected by the thread. The probe screw rod has an insertion depth adjustment scale
Sensor operating temperature	-30-160°C
Communication protocol	Support MODBUS-RTU protocol, support various manufacturers' own protocols
Signal input	Three channels of 4 ~ 20mA input, accuracy of 0.1%, can be connected to pressure, liquid level, temperature and other signals
Output current signal	4 ~ 20mA or 0ma ~ 20mA, 0-4-20ma can be selected, impedance 0 ~ 1K Q floating, accuracy 0.1%. Active output and passive output modes are supported
Output pulse signal	Positive, negative, net flow and heat accumulation pulses, one relay output, - Oct output, pulse width 6-1000ms
Sensor type	External and plug-in options